1. When the carbonization machine just starts heating (feeding), a heat source is needed to heat the carbonization machine.

① First, the hot air flow generated by the reverberatory furnace is used for combustion and carbonization to achieve the purpose of heating and carbonization.

② The other is to use a gasifier device to ignite the straw gas through the gasifier, and the combustible gas generated by the gasification is burned and carbonized to achieve the purpose of heating and carbonization (the gasified straw becomes carbonized carbon powder through the carbonized carbon powder output device, In addition, the combustible gas is recovered through the wood tar recovery device)

2. When the carbonization temperature reaches a certain temperature, the combustible gas is separated through the dust separator, and the combustible gas after dust separation is passed through the wood tar recovery device Recycling.

3. After carbonization and heating of self-produced gas, the reverberatory furnace heating or gasification furnace gas production device stops working, and the preliminary heating equipment ends.

4. After carbonization for about 0.5-1 hour (time and temperature vary), the carbon powder slowly flows from the carbonization into the carbonized carbon powder cooler and flows out from the cooler. The equipment is operating normally and can continuously unload materials.

5. Wood tar is an important chemical raw material, containing more than 300 chemical elements. The equipment will automatically discharge wood tar.