When carbonizing wood with intermittent carbonization equipment, you need to pay attention to the following points:

1. Control of the carbonization process: In the carbonization process, the control of temperature, time and pressure is crucial. It is necessary to ensure that the wood is carbonized under the appropriate conditions to achieve the desired carbonization effect. Too high or too low temperature, too long or too short time may affect the carbonization quality and performance of wood.

2. Equipment safety and maintenance: During the operation of intermittent carbonization equipment, the operating status of the equipment needs to be checked regularly to ensure the safe and stable operation of the equipment. At the same time, the equipment must be cleaned regularly to prevent impurities generated during the carbonization process from causing damage to the equipment.

3. Selection and pretreatment of wood: Not all wood is suitable for carbonization treatment. It is necessary to select tree species and specifications suitable for carbonization. At the same time, before carbonization, the wood needs to be pre-treated, such as removing impurities and moisture on the surface, to ensure the consistency and stability of the carbonization effect.

4. Ventilation and exhaust: Harmful gases, such as carbon monoxide, may be produced during the carbonization process. Therefore, it is necessary to set up a good ventilation and exhaust system near the carbonization equipment to ensure that harmful gases can be discharged in time to avoid harm to operators.

5. Post-carbonization treatment: After carbonization is completed, the wood needs to be post-processed, such as cooling, cleaning and drying. At the same time, the carbonization quality of the wood should be checked to ensure that it meets the usage requirements.

In short, when intermittent carbonization equipment carbonizes wood, it is necessary to pay attention to the control of the carbonization process, equipment safety and maintenance, wood selection and pretreatment, ventilation and exhaust, and carbonization post-treatment to ensure the quality and performance of carbonized wood.