The dust removal equipment for carbonizing machines mainly includes: cyclone dust collector, bag dust collector, wet dust collector. The following is a detailed introduction to the working principle and characteristics of the dust collector:

一、Cyclone dust collector

1. Working principle

 The dust-containing gas enters the dust collector at a high speed along the tangential direction. Under the action of centrifugal force, the dust is thrown to the wall of the device and falls along the wall into the ash hopper. The purified gas is discharged from the central tube.

2. Features

 Simple structure, low cost, no moving parts, easy maintenance.

Suitable for handling large particles of dust, but limited effect on finer dust removal.

Large air volume, which can meet the dust removal needs of carbonizing machines under a certain scale.

二、Bag dust collector

1. Working principle

 The dust-containing gas passes through the filter bag, and the dust is retained on the outer surface of the filter bag. The purified gas passes through the filter bag and is discharged from the air outlet. As the filtration proceeds, the dust on the filter bag gradually increases. When the resistance reaches a certain value, it is necessary to perform dust cleaning operations. Pulse jetting and other methods are usually used to remove the dust on the filter bag.

2. Features

 High dust removal efficiency, and good capture effect on fine dust.

 Strong adaptability, can handle dust-containing gases of different properties.

 Stable operation, can work in a wider range of temperature and pressure.

三、Wet dust collector

1. Working principle

Dust-containing gas contacts water or other liquids, so that dust and droplets are combined and captured. Dust removal can be achieved by spraying, water film and other methods.

2. Features

 It can remove dust and some harmful gases at the same time, and has a certain degree of safety for some occasions prone to explosive dust.

Suitable for handling high-temperature and high-humidity dust-containing gases.

Wastewater will be generated, which needs to be treated, otherwise it may cause secondary pollution.

If you have any equipment needs, please feel free to contact us. Zhengzhou Jiutian Machinery Equipment Co., Ltd. is a manufacturer specializing in the production of carbonization machines. If you have any questions, please feel free to contact us!