As the core equipment for biomass resource utilization, the long-term stable operation of the sawdust carbonization machine is directly related to production benefits and investment returns. Scientific maintenance can not only significantly extend the life of the equipment, but also continuously release its inherent advantages of high efficiency, environmental protection and energy saving.

1. Daily operation specifications. Avoid losses from the source. Strictly control the quality of raw materials. The humidity of raw materials is the "invisible killer" of the efficient operation of the carbonization machine. Sawdust with too high humidity can easily cause internal adhesion, uneven carbonization, and even blockage of pipelines. The humidity of the raw materials must be strictly controlled below 14%. If necessary, pre-treatment with drying equipment should be used to prevent wet materials from aggravating equipment corrosion and load. Eliminate overload operation. Continuous operation ≠ fatigue use! It is recommended to stop and cool every 8-10 hours of operation to avoid motor overheating or bearing deformation. During operation, the material must be fed evenly to prevent sudden overload from impacting the core components.

2. Inspection of key components: Prevent problems before they happen. Dynamic inspection of fasteners. Check the tightness of new machine wheel hoops, screws, belts, etc. every week. High-frequency vibration can easily cause loosening and falling off, causing component displacement or mechanical collision. Early warning of wear of wearing parts. Regularly disassemble and inspect components such as pressure rollers, rolling rollers, and propellers. If surface cracks or thickness reduction exceeds 10%, replace them immediately; clean up residual carbon slag during shutdown to avoid carbon accumulation and hardening and aggravated wear. Abnormal impact sounds during the operation of gears or chains may indicate broken teeth or misalignment, and the machine must be shut down for inspection.

3. Seasonal maintenance and storage: long-term dormancy strategy. Seasonal maintenance: thoroughly clean the hot air duct and sedimentation tank, remove the elevator tension wire, and reset the speed control motor parameters. Cover indoors to prevent dust, and build a shed outdoors to prevent rain; repaint the exposed metal surface every year to prevent rust, and spray it for protection every two years.

The value of the sawdust carbonization machine lies not only in cutting-edge technology, but also in scientific management throughout its life cycle. Every oiling and tightening of screws is the implementation of the commitment of "efficient and environmentally friendly production". With the power of maintenance, we can build a ten-year tool - let your carbonizer continue to be a reliable fulcrum for leveraging green wealth!